bym10-xxx, gl41x www.vishay.com vishay general semiconductor revision: 14-aug-13 1 document number: 88546 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount glass passivated junction rectifier features ? superectifier structure for high reliability condition ? ideal for automated placement ? low forward voltage drop ? low leakage current ? high forward surge capability ? meets environmental standard mil-s-19500 ? meets msl level 1, per j-st d-020, lf maximum peak of 250 c ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 typical applications for use in general purpose rect ification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication. mechanical data case: do-213ab, molded epoxy over glass body ? molding compound meets ul 94 v-0 flammability rating base p/n-e3 - rohs-co mpliant, commercial grade ? base p/nhe3 - rohs-compliant, aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? e3 suffix meets jesd 201 class 1a whisker test, he3 suffix meets jesd 201 class 2 whisker test polarity: two bands indicate cathode end - 1 st band denotes device type and 2 nd band denotes repetitive peak reverse voltage rating primary characteristics i f(av) 1.0 a v rrm (bym10-xxx, gl41x) 50 v to 1000 v, 50 v to 1600 v i fsm 30 a i r 10 a e as 5 mj v f 1.1 v, 1.2 v t j max. 175 c package do-213ab diode variations single die do-213ab superectifier ? maximum ratings (t a = 25 c unless otherwise noted) parameter symbol bym 10-50 bym 10-100 bym 10-200 bym 10-400 bym 10-600 bym 10-800 bym 10-1000 unit standard recovery device: 1 st band is white gl41a gl41b gl41d gl41g gl41j gl41k gl41m gl41t gl41y polarity color bands (2 nd band) gray red orange yellow green blue violet white brown max. repetitive peak ? reverse voltage v rrm 50 100 200 400 600 800 1000 1300 1600 v max. rms voltage v rms 35 70 140 280 420 560 700 910 1120 v max. dc blocking voltage v dc 50 100 200 400 600 800 1000 1300 1600 v max. average forward rectified current (fig. 1) i f(av) 1.0 a peak forward surge current ? 8.3 ms single half sine-wave i fsm 30 a max. full load reverse current full cycle average ? at t a = 75 c i r(av) 30 a non-repetitive peak reverse avalanche energy at t j = 25 c, ? i as = 1 a, l = 10 mh e as 5-mj operating junction and storage temperature range t j , t stg - 65 to + 175 c
bym10-xxx, gl41x www.vishay.com vishay general semiconductor revision: 14-aug-13 2 document number: 88546 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal (2) thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal note (1) aec-q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol bym 10-50 bym 10-100 bym 10-200 bym 10-400 bym 10-600 bym 10-800 bym 10-1000 unit gl41a gl41b gl41d gl41g gl41j gl41k gl41m gl41t gl41y max. instantaneous forward voltage 1.0 a v f 1.1 1.2 v max. dc reverse current at rated dc blocking voltage t a = 25 c i r 10 a t a = 125 c 50 typical junction capacitance 4.0 v, 1 mhz c j 8.0 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol bym 10-50 bym 10-100 bym 10-200 bym 10-400 bym 10-600 bym 10-800 bym 10-1000 unit gl41a gl41b gl41d gl41g gl41j gl41k gl41m gl41t gl41y typical thermal resistance r ? ja (1) 75 c/w r ? jt (2) 30 ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode bym10-600-e3/96 0.114 96 1500 7" diam eter plastic tape and reel bym10-600-e3/97 0.114 97 5000 13" diameter plastic tape and reel gl41j-e3/96 0.114 96 1500 7" diameter plastic tape and reel gl41j-e3/97 0.114 97 5000 13" diameter plastic tape and reel bym10-600he3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel bym10-600he3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel gl41jhe3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel gl41jhe3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel
bym10-xxx, gl41x www.vishay.com vishay general semiconductor revision: 14-aug-13 3 document number: 88546 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - forward current derating curve fig. 2 - max. non-repetitive peak forward surge current fig. 3 - typical instantaneous forward characteristics fig. 4 - max. non-repetitive peak forward surge current fig. 5 - typical j unction capacitance fig. 6 - typical transient thermal impedance 25 50 75 100 125 150 175 0 0.25 0.50 0.75 1.0 60 hz resistive or inductive load average forward rectified current (a) terminal temperature (c) gl41a thru gl41m gl41t thru gl41y 1 10 100 10 5.0 15 20 25 30 gl41a thru gl41m 0 number of cycles at 60 hz peak forward surge current (a) t j = t j max. 8.3 ms single half sine-wave 0.4 0.6 0.8 1.0 1.2 1.4 1.6 10 1 0.1 0.01 t j = 25 c pulse width = 300 s 1 % duty cycle instantaneous forward voltage (v) instantaneous forward current (a) gl41a thru gl41j gl41k thru gl41y 0 20 40 60 80 100 0.01 0.1 1 10 instantaneous reverse current (a) t j = 100 c t j = 25 c percent of rated peak reverse voltage (%) 1 10 100 10 1 100 reverse voltage (v) junction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 mv p-p 0.01 0.1 10 1 100 0.1 10 100 1 mounted on 0.20" x 0.27" (5 mm x 7 mm) copper pad areas ( t - pulse duration (s) transient thermal impedance (c/w)
bym10-xxx, gl41x www.vishay.com vishay general semiconductor revision: 14-aug-13 4 document number: 88546 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) do-213ab 1 st band denotes type and positive end (cathode) 1 st band solderable ends d2 = d1 + 0 - 0.008 (0.20) d2 0.105 (2.67) 0.095 (2.41) d1 = 0.022 (0.56) 0.018 (0.46) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) mounting pad layout 0.138 (3.5) max. 0.049 (1.25) min. 0.238 (6.0) ref. 0.118 (3.0) min.
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
